Product Description
10kw off grid solar system Configuration
item
Model
Description
Quantity
1
solar panel
Poly 300w-375w
28 pcs
2
solar inverter
2000W EU standard or US standard 110v/220v/380v
1 piece
3
Solar charge controller
192v 100A
1 piece
4
Solar battery
12v 200AH/250AH
16 pieces
5
Solar mounting system
pitched/metal roof/cement roof/ground/Carport
1 set
6
Pv combiner box
4 inputs 1 outputs
1 piece
7
Cable
Single-core 4mm2 and 16mm2 PV cable
200 meters
8
MC4 connector
Rated Voltage:1000V
20 pairs
9
Tool bag
5 kinds of PV installation tools
1 set
Off-Grid Solar Systems
An off-grid solar system (off-the-grid, standalone) is the obvious alternative to one that is grid-tied. For homeowners that have access to the grid, off-grid solar systems are usually out of question.Here`s why: To ensure access to electricity at all times, off-grid solar systems require battery storage and a backup generator (if you live off-the-grid). On top of this, a battery bank typically needs to be replaced after 15 years. Batteries are complicated, expensiveand decrease overall system efficiency.
Off-grid photovoltaic power generation system is widely used in remote mountainous areas, areas without power, islands, communication base stations and street lamps and other applications.Photovoltaic phalanx converts solar energy into electric energy under the condition of light, and supplies power to the load through the solar charge-discharge controller, and meanwhile charges the battery pack.In the absence of light, through the solar charge and discharge controller by the battery group to dc load power supply, at the same time the battery also directly to the independent inverter power supply, through the independent inverter inverter invert into alternating current, to ac load power supply.
Half Cell Module comprises two separated and identical solalr cell arrays, which means the ordinary strings of cells are cut into
halves, and these shorter strings compose which has separated current paths. When a module is shaded, only one side shaded array's
current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module
is shaded, the affected working areas of Blade will be 50% less.
By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.
The working principle of the grid-connected and off-grid integrated machine is that when the grid is normal, the inverter switches to grid-connected power generation mode, and the photovoltaic power is converted into MPPT mode.
Feed power to the grid. When the grid is abnormal, the inverter will swing to perform anti-islanding detection. Switch from the need to switch to off-grid power generation mode. Although the grid is abnormal, the inverter continues to invert photovoltaic power into high-quality AC power to the load. powered by. In this way, it is possible to prevent the shortcomings that normal power generation cannot be performed even though the photovoltaic is normal due to the abnormality of the grid in the stand-alone grid-connected mode.
Longer Cycle Life : Offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery ,
helping to minimize replacement cost and reduce total cost of ownership
Lighter Weight : About 40% of the weight of a comparable lead acid battery . A drop in replacement for lead acid batteries
Higher Power : Delivers twice power of lead acid battery ,even high discharge rate, while maintaining high energy capacity
Wider Temperature Range : -20ºC~60ºC
Superior Safety: Lithium Iron Phosphate chemistry eleminates the risk of explosion or combustion due to high impact overcharging
or short circuit situation
Pitched roof solar mounting system
Flat roof solar mounting system
Ballast type solar mounting system
Ground solar mounting system
Carport solar mounting system
Packaging & Shipping
Packed in firm wooden case
12 working days after receiving balance.
After Sales Service
Our Service:
b.Asymmetric dual MPPT which are compatible to all kinds of solar roofs
c.Max. efficiency of 98.0%, European efficiency of 97.6%
d.Super wide input voltage range(150V-1000V), supporting all varieties of solar panels and string desings
e.With reduced derating
2.Convenient Installation
a.Transformerless, smaller and lighter
b.AC output quick connector design, for faster installation
c.Speciaized mountingl design, easy to install
3.Smart and Easy to Use
a.One-button safety setting, easy configuration of all parameters
b.Built-in independent RTC chip, supporting data storage of 25 years
c.Integrated LCD graphical display, showing daily/monthly/yearly generating capacity
d.Integrated RS232 / Wi-Fi interfaces, for improved communication
e.Free monitoring anytime anywhere
f.Local and remote intelligent maintenance by PC, IOS and Android devices
g.Responds to power grid dispatching, energy management of micro-grids
h.Integrated with the function of reactive adjusting
4.Safe and Reliable
a.IP65 protection for indoor and outdoor installation
b.Aluminum case design to enhance heat dissipation and prevent rust corrosion, prolong life time
c.Built-in high voltage DC switch for safer maintenance and application
d.Built-in convective fans to lower the temperature of core components, prolong life time
e.Natural convection for longer life
FAQ
FAQ:
Q 1. what's the payment term
A. We accept T/T, L/C,WEST UNION, PAYPAL, CASH
Q 2. What's the delivery time
A. usually it will take about three weeks for production
Q 3. What is the standard of package
A. Export standard package or special package according to customer requirement
.
Q 4. what kind of product quality your factory offer
A. We offer most competitive prices with best quality
Q 5. Do you accept OEM business
A.We accept OEM with your autherization.
Q 6.What is your production capacity
A. We can finish four 40 HQ mini circuit breaker each month, four 20 HQ contactor, two 20 feet container for the frequency
inverter. Each product has different production capacity, we can talk details by email.
Q 7.Which market do you already sell
A.We already ship to Europ, Middle East, South America, Asia, Afria etc.
Q8. what kind of certificate you have
A.We have ISO9000, CB, CE, INMETRO, SONCAP, SASO
Certifications
Product Description
10kw off grid solar system Configuration
Off-Grid Solar Systems
An off-grid solar system (off-the-grid, standalone) is the obvious alternative to one that is grid-tied. For homeowners that have access to the grid, off-grid solar systems are usually out of question.Here`s why: To ensure access to electricity at all times, off-grid solar systems require battery storage and a backup generator (if you live off-the-grid). On top of this, a battery bank typically needs to be replaced after 15 years. Batteries are complicated, expensiveand decrease overall system efficiency.
Off-grid photovoltaic power generation system is widely used in remote mountainous areas, areas without power, islands, communication base stations and street lamps and other applications.Photovoltaic phalanx converts solar energy into electric energy under the condition of light, and supplies power to the load through the solar charge-discharge controller, and meanwhile charges the battery pack.In the absence of light, through the solar charge and discharge controller by the battery group to dc load power supply, at the same time the battery also directly to the independent inverter power supply, through the independent inverter inverter invert into alternating current, to ac load power supply.
Half Cell Module comprises two separated and identical solalr cell arrays, which means the ordinary strings of cells are cut into
halves, and these shorter strings compose which has separated current paths. When a module is shaded, only one side shaded array's
current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module
is shaded, the affected working areas of Blade will be 50% less.
By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.
The working principle of the grid-connected and off-grid integrated machine is that when the grid is normal, the inverter switches to grid-connected power generation mode, and the photovoltaic power is converted into MPPT mode.
Feed power to the grid. When the grid is abnormal, the inverter will swing to perform anti-islanding detection. Switch from the need to switch to off-grid power generation mode. Although the grid is abnormal, the inverter continues to invert photovoltaic power into high-quality AC power to the load. powered by. In this way, it is possible to prevent the shortcomings that normal power generation cannot be performed even though the photovoltaic is normal due to the abnormality of the grid in the stand-alone grid-connected mode.
Longer Cycle Life : Offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery ,
helping to minimize replacement cost and reduce total cost of ownership
Lighter Weight : About 40% of the weight of a comparable lead acid battery . A drop in replacement for lead acid batteries
Higher Power : Delivers twice power of lead acid battery ,even high discharge rate, while maintaining high energy capacity
Wider Temperature Range : -20ºC~60ºC
Superior Safety: Lithium Iron Phosphate chemistry eleminates the risk of explosion or combustion due to high impact overcharging
or short circuit situation
Pitched roof solar mounting system
Flat roof solar mounting system
Ballast type solar mounting system
Ground solar mounting system
Carport solar mounting system
Packaging & Shipping
Packed in firm wooden case
12 working days after receiving balance.
After Sales Service
Our Service:
b.Asymmetric dual MPPT which are compatible to all kinds of solar roofs
c.Max. efficiency of 98.0%, European efficiency of 97.6%
d.Super wide input voltage range(150V-1000
Product Description
10kw off grid solar system Configuration
item
Model
Description
Quantity
1
solar panel
Poly 300w-375w
28 pcs
2
solar inverter
2000W EU standard or US standard 110v/220v/380v
1 piece
3
Solar charge controller
192v 100A
1 piece
4
Solar battery
12v 200AH/250AH
16 pieces
5
Solar mounting system
pitched/metal roof/cement roof/ground/Carport
1 set
6
Pv combiner box
4 inputs 1 outputs
1 piece
7
Cable
Single-core 4mm2 and 16mm2 PV cable
200 meters
8
MC4 connector
Rated Voltage:1000V
20 pairs
9
Tool bag
5 kinds of PV installation tools
1 set
Off-Grid Solar Systems
An off-grid solar system (off-the-grid, standalone) is the obvious alternative to one that is grid-tied. For homeowners that have access to the grid, off-grid solar systems are usually out of question.Here`s why: To ensure access to electricity at all times, off-grid solar systems require battery storage and a backup generator (if you live off-the-grid). On top of this, a battery bank typically needs to be replaced after 15 years. Batteries are complicated, expensiveand decrease overall system efficiency.
Off-grid photovoltaic power generation system is widely used in remote mountainous areas, areas without power, islands, communication base stations and street lamps and other applications.Photovoltaic phalanx converts solar energy into electric energy under the condition of light, and supplies power to the load through the solar charge-discharge controller, and meanwhile charges the battery pack.In the absence of light, through the solar charge and discharge controller by the battery group to dc load power supply, at the same time the battery also directly to the independent inverter power supply, through the independent inverter inverter invert into alternating current, to ac load power supply.
Half Cell Module comprises two separated and identical solalr cell arrays, which means the ordinary strings of cells are cut into
halves, and these shorter strings compose which has separated current paths. When a module is shaded, only one side shaded array's
current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module
is shaded, the affected working areas of Blade will be 50% less.
By cutting solar cell into halves, the internal power loss will be lower and hot spot effect will also be reduced.
The working principle of the grid-connected and off-grid integrated machine is that when the grid is normal, the inverter switches to grid-connected power generation mode, and the photovoltaic power is converted into MPPT mode.
Feed power to the grid. When the grid is abnormal, the inverter will swing to perform anti-islanding detection. Switch from the need to switch to off-grid power generation mode. Although the grid is abnormal, the inverter continues to invert photovoltaic power into high-quality AC power to the load. powered by. In this way, it is possible to prevent the shortcomings that normal power generation cannot be performed even though the photovoltaic is normal due to the abnormality of the grid in the stand-alone grid-connected mode.
Longer Cycle Life : Offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery ,
helping to minimize replacement cost and reduce total cost of ownership
Lighter Weight : About 40% of the weight of a comparable lead acid battery . A drop in replacement for lead acid batteries
Higher Power : Delivers twice power of lead acid battery ,even high discharge rate, while maintaining high energy capacity
Wider Temperature Range : -20ºC~60ºC
Superior Safety: Lithium Iron Phosphate chemistry eleminates the risk of explosion or combustion due to high impact overcharging
or short circuit situation
Pitched roof solar mounting system
Flat roof solar mounting system
Ballast type solar mounting system
Ground solar mounting system
Carport solar mounting system
Packaging & Shipping
Packed in firm wooden case
12 working days after receiving balance.
After Sales Service
Our Service:
b.Asymmetric dual MPPT which are compatible to all kinds of solar roofs
c.Max. efficiency of 98.0%, European efficiency of 97.6%
d.Super wide input voltage range(150V-1000V), supporting all varieties of solar panels and string desings
e.With reduced derating
2.Convenient Installation
a.Transformerless, smaller and lighter
b.AC output quick connector design, for faster installation
c.Speciaized mountingl design, easy to install
3.Smart and Easy to Use
a.One-button safety setting, easy configuration of all parameters
b.Built-in independent RTC chip, supporting data storage of 25 years
c.Integrated LCD graphical display, showing daily/monthly/yearly generating capacity
d.Integrated RS232 / Wi-Fi interfaces, for improved communication
e.Free monitoring anytime anywhere
f.Local and remote intelligent maintenance by PC, IOS and Android devices
g.Responds to power grid dispatching, energy management of micro-grids
h.Integrated with the function of reactive adjusting
4.Safe and Reliable
a.IP65 protection for indoor and outdoor installation
b.Aluminum case design to enhance heat dissipation and prevent rust corrosion, prolong life time
c.Built-in high voltage DC switch for safer maintenance and application
d.Built-in convective fans to lower the temperature of core components, prolong life time
e.Natural convection for longer life
FAQ
FAQ:
Q 1. what's the payment term
A. We accept T/T, L/C,WEST UNION, PAYPAL, CASH
Q 2. What's the delivery time
A. usually it will take about three weeks for production
Q 3. What is the standard of package
A. Export standard package or special package according to customer requirement
.
Q 4. what kind of product quality your factory offer
A. We offer most competitive prices with best quality
Q 5. Do you accept OEM business
A.We accept OEM with your autherization.
Q 6.What is your production capacity
A. We can finish four 40 HQ mini circuit breaker each month, four 20 HQ contactor, two 20 feet container for the frequency
inverter. Each product has different production capacity, we can talk details by email.
Q 7.Which market do you already sell
A.We already ship to Europ, Middle East, South America, Asia, Afria etc.
Q8. what kind of certificate you have
A.We have ISO9000, CB, CE, INMETRO, SONCAP, SASO
Certifications